OMG ManTIS - Manufacturing and Industrial Systems Domain TF

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.


====== Past Meetings ======



==== OMG TC Meeting, Reston, VA, March 2013 ====

** Meeting notice: ManTIS did not meet**

----


\\ 


==== OMG TC Meeting, December 10-14, 2012, Burlingame, CA USA  ====

__ManTIS DTF agenda items__

Thursday, Dec. 13, 0900-1200

  * Requirements Interchange Format V1.1 (ReqIF) - current state and RTF report, Achim Seibertz/ Bertil Muth

  * SysML Extensions for solver-based simulators with Simulink and Modelica, Conrad Bock

  * ManTIS roadmap discussion

----

\\ 


==== OMG TC Meeting, Cambridge, MA, June 2012 ====

** Meeting notice: ManTIS did not meet**
----

==== OMG TC Meeting, Reston, VA, March 2012 ====

*** ManTIS meeting highlights ***
** Report from ISO TC 184/SC 4 **
   * Potential for collaboration:
     * New Architecture for SC4 standards
     * ISO 8000 Data Quality
   * Work to do
     * ISO is replacing ISO 10303-203 and -214 by ISO 10303-242:
       * Foundations of PLM Services
       * PLM Services V3
     * Potential for new projects
       * Companion standard for ISO 10303-233 Systems Engineering
       * Companion Standards for ISO 15926 family of standards

----

==== OMG TC Meeting Cambridge, MA, USA, Sept. 20-24, 2010 ====

__ManTIS DTF meeting notice__

** ManTIS did NOT convene at this meeting **


==== OMG TC Meeting Minneapolis, MN, June 21-25, 2010 ====

__ManTIS DTF agenda items__

Monday, June 21, 0900-1200

The comment period of the ReqIF RFC passed without feedback. ManTIS may wish to discuss the issuance of the specification and shall vote upon recommendation for adoption by the DTC.

  * Requirements Interchange Format (ReqIF) RFC discussion

  * Vote to recommend ReqIF RFC for adoption by the TC and FTF charter

__ManTIS DTF meeting minutes__

Bertil Muth representing ProSTEP iViP association presented the final ReqIF RFC to be recommended for adoption by the TC. This vote passed and a initial FTF was chartered.


-----

==== OMG TC Meeting Jacksonville, FL, March 22-26, 2010 ====

== ManTIS DTF agenda items ==


Monday, March 22, 0900-1200

  * Requirements Interchange Format (ReqIF) RFC presentation and discussion

  * Vote to recommend ReqIF RFC for review by the OMG DTC 

  * Report about first results from project ISYPROM - Integrated Systems and Process Modeling

  * Roadmap discussion and relations to other standardization activities


Thursday, March 25, 0900-1200

  * Joint Meeting with Ontology DSIG on ontological modeling in manufacturing

  * ISO TC184 SC4 Future Architecture


== Minutes ==

[[http://www.omg.org/cgi-bin/doc?mantis/2010-03-01]]

== Votes Undertaken by the ManTIS DTF ==

Vote to recommend ReqIF RFC for issuance and review by OMG DTC was made during the ManTIS DTF plenary meeting on Monday, March 22.

Quorum Check: 
  * Meeting Quorum is 3
  * Voting members present were 6, including proxies.
Vote to recommend ReqIF RFC for issuance and review by OMG DTC:
  * Motion to recommend ReqIF RFC made by ProSTEP iViP
  *  Second by NIST
  * JohnDeere motion for whiteballot
  * No objections
  * Motion passed

A second vote to recommend ReqIF RFC Alpha version for issuance and review by OMG DTC was made during an outbreak session on Thursday, March 25. The ReqIF Alpha version document (mantis/10-03-07) reflects the changes made by recommendation during the AB review on Monday, March 22.

Quorum Check: 
  * Meeting Quorum is 3
  * Voting members present were 4, including proxies.

Vote to recommend ReqIF RFC for issuance and review by OMG DTC:
  * Motion to recommend ReqIF RFC made by ModelAlchemy
 
  * Second by ProSTEP iViP

  * NIST motion for whiteballot

  * No objections

  * Motion passed


------


==== OMG TC Meeting Long Beach, CA, December 7-11, 2009 ====

__ManTIS DTF agenda__


ManTIS plenary: Thu, December 10, 09:00-17:00

  * EXPRESS MM FTF report

  * Report from ISO TC184 SC4 Meeting, Rotterdam, Nov. 2009

  * CEN effort on 'Orchestrating industrial data' (ORCHID)


-----



==== OMG TC Meeting San Antonio, TX, September 14-18, 2009 ====

__ManTIS DTF agenda__


ManTIS plenary: Thu, September 17, 09:00-17:00

  * 09:00 – 09:05 Introductions

  * 09:05 – 09:10 Finalization of agenda 

  * 09:10 – 09:40 ISO TC184 SC4 IT Framework (David Price) 

  * 09:10 – 10:30 ManTIS roadmap, business development 

  * //	10:30 	Coffee break //

  * 10:45 – 12:00 Requirements Interchange Format, standardization process preparation (Bertil Muth) 

  * //	12:00 	Lunch break //

  * 13:00 – 14:30 Requirements Interchange Format, SysML and AP233 (Bertil Muth)

  * // 14:30 	Coffee break //

  * 14:45 – 16:45 EXPRESS Metamodel FTF 2 meeting

  * 16:45 – 17:00 Next Meeting Planning

  * //	17:00 	Adjourn //

-----



==== OMG TC Meeting San Jose, Costa Rica, June 22-26, 2009 ====

Meeting notice: ManTIS did NOT met in San Jose


-----



==== OMG TC Meeting Washington DC, March 23-27, 2009 ====


__ManTIS DTF tentative agenda items__

ManTIS RIF RFP discussion: Tue, March 24, 13:00-17:00
  * 13:00 – 17:00 **CANCELLED**

SE-DSIG RIF presentation

 * //09:00 – 17:00	SE-DSIG Plenary //


 * // 10:00	Requirements Interchange Format (RIF) proposal and SysML alignment  //



ManTIS plenary: Thu, March 26, 09:00-17:00

  * 09:00 – 12:00 **Joint SE-DSIG & ManTIS plenary on RIF**
  * 09:00 – 09:05 Introductions
  * 09:05 – 09:10 Finalization of agenda
  * 09:10 – 10:00 Requirements Interchange Format (RIF) presentation and discussion (TBC)
  * 10:00 – 10:15 Coffee break
  * 10:15 – 12:00 Requirements Interchange Format (RIF) standardization process preparation (TBC)
  * 12:00 Lunch break
  * 13:00 – 17:00 **Special session on integrated product modeling**
  * 13:00 – 13:30 Ontological Product Modelling reloaded (Conrad Bock)
  * 13:30 – 14:00 SWOP – Semantic Web-based Open engineering Platform – Progress Report (Bernd G. Wenzel)
  * 14:00 – 14:30 Integrated Systems, Product and Enterprise Process Modeling (ISYPROM) (Uwe Kaufmann)
  * 14:30 – 15:00 Other tentative presentations and discussion
  * 15:00 Coffee break
  * 15:30 – 16:30 EXPRESS Metamodel FTF meeting 
  * 16:30 – 17:00 Roadmap Update, Other Business, Next Meeting Planning
  * 17:00 Adjourn

-----



==== OMG TC Meeting Santa Clara, December 8-12, 2008 ====


ManTIS plenary: Thu, December 11, 09:00-12:00

__Agenda items:__

  * 09:00 – 09:05 Introductions
  * 09:05 – 09:10 Finalization of agenda
  * 09:10 – 10:00 Preparing a RFP-proposal for a Requirements Interchange Format RIF (Steven Vettermann)
  * 10:00 – 10:15 Coffee break
  * 10:15 – 11:10 Ontological Product Modelling (Conrad Bock)
  * 11:10 – 11:30 SWOP – Semantic Web-based Open engineering Platform – Project Report (Bernd G. Wenzel)
  * 11:30 – 11:40 Planning of the next meeting
  * 11:40 – 11:50 Roadmap Update
  * 11:50 – 12:00 Any Other Business
  * 12:00 Adjourn
  * 12:00 – 13:00 Lunch Break
  * //13:00 – 17:00 No direct ManTIS business//

**Mantis meeting minutes, December 11, 2008, taken by Manfred Koethe**

Bernd Wenzel convened the meeting and discussed the agenda. (Agenda approved as is).

Steven Vetterman (PROSTEP) presenting the existing (German) Requirements Interchange Format (RIF) industrial standard.

RIF was developed on behalf of the German Automotive industry as a vendor-neutral requirements exchange vehicle. RIF is specified by an UML metamodel and XML Schema. RIF in its current form is in daily use in Germany.

The RIF community has now the desire to standardize RIF on international level through the OMG.
Intention is to make RIF an added value to SysML. The plan is to change the RIF metamodel to make it MOF compliant.
Discussion (started by David Price) if RIF supports structured requirements / requirements propoerties, or if requirements are just text. As David said, timing for the RIF effort is good since SysML 2.0 initial phase is just starting. Given the need for harmonization, a RFC might not be possible, however, the proposed timing appears to be well-aligned with the upcoming SysML 2.0 effort. The group agrees to  consult Sandy Friedenthal.

David Price: Need a paper outlining what the differences to SysML capapabilities are. Also INCOSE working on SysML – AP233 mapping. RIF need harmonization .

Sandy suggested to file an issue (maybe of a RIF subset) against the SysML RTF.

Sandy: There is a whitepaper on RIF – SysML integration on the SE DSIG webpage.


Conrad Bock presenting Ontological Product Modeling for Collaborative Design.

This was a great presentation – we need to continue this in a future meeting.

-----


==== OMG TC Meeting Ottawa, June 23 - 27, 2008 ====

ManTIS plenary: Thu, June 26, 09:00-12:00

__Agenda items:__
ManTIS did not meet


-----

==== 29 March, 2007, San Diego Plenary Meeting ====


Product Lifecycle Management Services V2.0 revised submission has been posted to the OMG server with the document number mantis/2007-03-01 
The machine -readable files of the submission are available as mantis/2007-03-03 
The submission with all assoicated files has been linked to the RFP work in progress page located at [[http://www.omg.org/techprocess/meetings/schedule/PLM_Services_V2.0_RFP.html]]
 
----

==== 5 December, 2006 Washington Plenary Meeting =====

PLM Services V2.0 was reviewed with document numbers:

Mantis/2006-12-01 PLM Services V2. Document

Mantis/2006-12-02 Platform Specific Model (PSM) Web Services

Mantis/2006-12-03 PLM Services V2 XMI

Mantis/2006-12-04 PLM Services Errata

A number of presentations were held in collaboration with the Systems Engineering DSIG:
^ Document No. ^ Document Description ^ Contact ^
| 2006-12-05 | MEXICO and EXPRESS_UML Interoperability |  Uwe Kaufmann |
| 2006-12-06 | EXPRESS / HDF Status| David Price|
| 2006-12-07 | Interoperation in Industrial Automation: ISO Viewptoint| Richard Martin|
| 2006-12-08 | SE Interoperability Plugfest| Peter Denno|
| 2006-12-09 | AP233 Progress including DODAF| David Price|
| 2006-12-10| PLM Services V2 Revised Submission| Lutz Laemmer|
| 2006-12-11| Status of PLM Services Deployment| Michael Feltes|
| 2006-12-12| ManTIS TC Presentation| R. Claus|
| 2006-12-13| ManTIS Meeting Minutes| R. Claus|


----

==== 20-24 June 2005, Boston Plenary Meetings ====


== PLM Services V 2. Lutz Lammer;  mantis/2005-06-02 ==
 
AB Reviewed the RFP on June 20, 2005. Several comments were received. PLM Services V1 adopted in April 2004, finalized April 2005. Current V2 focus is on digital engineering change request between supplier and OEM. ISO 10303-214 (Specification Control and Process Planning) development prompts V 2 effort. Scope of V2 aligned with Conformance Class CC21 in AP 214. Some modeling issues and optimized queries to be included in effort. 

== KBE Services for PLM; document mantis/2005-06-03. Pablo Bermell-Garcia. ==
 
Draft RFP discussed. It will focus on: Rules, Engineering Data Abstraction, and Relationships between engineering artifacts.

== Virtual  Research Lab / Knowledge Community in Production; mantis/2005-06-04. Uwe Kaufman. ==

Exploring issues in standardization research. 

== Edward Barkmeyer, NIST; mantis/2005-06-06 ==
 
Transformation of EXPRESS Models Using OMG Technologies – migrate Express models to MDA. Ed described an effort to develop a UML / MOF model of EXPRESS. Effort may lead to an RFP or RFC. A substantial portion of the mapping has been started and an initial draft may be available in early July 2005. 

== MOF2 / Express Integration and Coexistance (Mexico) Manfred Koethe; mantis/2005-06-010 ==
 

== Mantis Roadmap, mantis/2005-06-09 ==
OMG ManTIS - Manufacturing and Industrial Systems Domain TF

User Tools

Site Tools

Page Tools
