ManTIS DTF will convene at the next OMG technical meeting in Nashville, TN, in the week of September 23 2019.

Please take notice of the RFI for a "Product Knowledge Framework”, issued at the Amsterdam TC meeting. This RFI is soliciting responses by Nov. 11. 2019. We're going to discuss the RFI responses at the December TC meeting in Long Beach, CA.

• RFP on Production Logistics Modeling
• OMG/ISO/MIMOSA coordination on lifecycle asset management
• tracing a PKF/UAF Ontology in OWL to/through or in parallel with MOF
• RFI / RFP for model integration / model interchange beyond XMI
• PLM-integrated MBSE / SysML Ecosystem
• Formal methods for digital master / digital twin representation and interlinking

Plenary, September 23 2019, 09:00-17:00

• INCOSE DEIX WG (Digital Engineering Information Exchange) and other
• Formal methods for digital master / digital twin representation and interlinking
• Industrie 4.0, IIC

The agenda for the meeting is under preparation. For the completion of the agenda please provide your interest for the upcoming meeting to the attention of the mantis chairs mantis-chair@omg.org.

For more information about the OMG TC meeting also check: OMG Meeting information and registration and OMG's web-site: OMG

ManTIS hosted a series of OMG information days with the objective to initiate discussion with other interested parties like IIC, Industrie 4.0, Smart Manufacturing.

Please also check Information from past Manufacturing Information Days here:

• Burlingame 2017 Model-Based Engineering, Automation and IoT in Smart Manufacturing Information Day

• Brussels 2017 Internet of Things and Model-Based Engineering in Manufacturing - What Are the New Requirements for IT Standards to Enable Smart Manufacturing?

• Berlin 2015 Model-Based Engineering in PLM and Manufacturing - Standardization for the Industrial IT-Infrastructure for Industry 4.0 and Smart Manufacturing

ManTIS is OMG's Manufacturing Technology and Industrial Systems Domain Task Force (ManTIS DTF). The mission of ManTIS is to foster the emergence of cost effective, timely, commercially available and interoperable software components for the Manufacturing and Industrial Systems domain through the development of standard interfaces using the OMG process. ManTIS will issue specifications for Manufacturing, Industrial Processes and Control Systems.
Objectives of ManTIS are:

• To Recommend technology specifications based on OMG's Model Driven Architecture (MDA) that enable interoperability, reusability and modularity.
• To Encourage development of standard interfaces that encapsulate legacy systems, enabling their integration and easing migration to new technologies.
• To Encourage adoption of ManTIS-related OMG specifications by other standardization organizations
• To Establish a working relationship with other Task Forces in both Platform and Domain Technology Committees of the OMG to provide mutual support and leverage for each other's specifications.
• To Establish and maintain active liaison relationships with appropriate external organizations in support of the preceding goals.
  

This WIKI will capture the work of ManTIS and will help to find the relevant documentation. If you would like to join the ManTIS group or participate in the ongoing discussion feel free to contact the chairs mentioned below.
Current hot topics of ManTIS include the Integration of PLM and MBSE and standardization work in the context of the Industrial Internet and Industrie 4.0.

Uwe Kaufmann, ModelAlchemy Consulting, Falkensee, Germany

Christian Muggeo, CONTACT Software GmbH, Kaiserslautern, Germany

Chairs E-Mail: mantis-chair@omg.org Group E-Mail: mantis@omg.org

ManTIS is workig together with OMG's SE DSIG on the integration of PLM and MBSE. It therefor wants to bring all relevant stakeholders together: PLM and MBSE vendors as well as industry users and academia. The working group PLM4MBSE of the German chapter of INCOSE (GfSE e.V.) published a Paper with 10 thesis about MBSE and PLM.

• Product Knowledge Framework (PKF) RFI (William Beavin, BOEING)
  • http://doc.omg.org/mantis/2019-06-01
• MBSE – Why Model Management Matters (Christian Muggeo, CONTACT Software)
  • http://doc.omg.org/mantis/2019-06-02
• Research Project GENIAL: SysML as core component of a knowledge-based platform supporting roadmapping in the early phases of integrated microelectronic innovation processes in the automotive industry (Damun Mollahassani, University of Kaiserslautern, VPE)
  • http://doc.omg.org/mantis/2019-06-03
• SENSR - Simple Electronic Notation for Sensor Reporting initial RFP submission presentation (Jason Smith, Elemental Reasoning)
  • http://doc.omg.org/mantis/2019-06-04
• prostep ivip SysML Workflow Forum - status and future plans (Veronica Haber, prostep ivip)
  • http://doc.omg.org/mantis/2019-06-05
• GfSE SysML Industrialization (SMInd) status and update (Uwe Kaufmann, GfSE)
  • http://doc.omg.org/mantis/2019-06-06
• Exchange and Harmonize SysML Models with SpecIF (Oskar von Dungern, Adessso)
  • http://doc.omg.org/mantis/2019-06-07
• Model interchange – needs Diff and Merge capabilities! (Daniel Siegl, LieberLieber)
  • http://doc.omg.org/mantis/2019-06-08
• Ideas and requirements for RFP/RFI on Model Interchange beyond XMI (Uwe Kaufmann, GfSE)
  • http://doc.omg.org/mantis/2019-06-09
• Update on Productive 4.0 project and intro to Arrowhead Tools (Øystein Haugen, HIOF)
  • http://doc.omg.org/mantis/2019-06-10

• GfSE activities update (Uwe Kaufmann,GfSE)
  • http://doc.omg.org/mantis/2019-03-01
• PLM / SE Integration of CONTACT Elements and valispace (Louise Lindblad, valispace & Christian Muggeo, CONTACT Software)
  • http://doc.omg.org/mantis/2019-03-02
• SENSR Draft RFP submission presentation (Jason Smith, ElementalReasoning)
  • http://doc.omg.org/mantis/2019-03-03
• ISO TC 184 SC4 - overview of current projects and activities (Allison Barnard-Feeney, NIST)
  • http://doc.omg.org/mantis/2019-03-04
• Production and Logistics Systems Modeling (Timothy Sprock, NIST)
  • http://doc.omg.org/mantis/2019-03-05

Highlights / presentations from this Meeting:

• prostep ivip SysML WorkFlow Forum presentation (Timo Wekerle, prostep ivip)
  • http://doc.omg.org/mantis/2018-12-01
• Closed-Loop Systems Engineering with CONTACT Elements – a tool vendor demonstration on PLM-MBSE integration (Christian Muggeo, CONTACT Software)
  • http://doc.omg.org/mantis/2018-12-02
• Productive 4.0 and HIOF (Øystein Haugen, HIOF)
  • http://doc.omg.org/mantis/2018-12-03
• Simple Electronic Notation for Sensor Reporting (SENSR) RFP submission status (Jason Smith, Elemental Reasoning)

• SENSR RFP
• Co-Chair Election

• SENSR RFP

ManTIS DTF will convene at the next OMG technical meeting in Boston, MA, in the week of June 18 2018.

Following are the items of interest as discussed in Reston:

• Model Interchange (MI) with and beyond XMI
  • Progress report from prostep ivip SysML Workflow Forum
  • Identify Use Cases related to MI (e.g. Long Term Archiving)
• Continue work to establish a PLM-integrated MBSE / SysML Ecosystem
• Tentative: UAF Ontology RFI/RFP
  • Identification of use cases
  • Discuss “UAF Knowledge Base” jointly with UAF, ManTIS & Ontology
• Production Logistics Modeling RFC/RFP
  • Mid-term: higher level abstractions by 08/2018
• Long Term / Reach out to
  • INCOSE TIMLMWG (Tool Integration and Model Lifecycle Mgmt.)
  • MIMOSA - An Operations and Maintenance Information Open System Alliance
  • ISO TC 184 SC4 – re-initiate liaison relationship
  • Industrie 4.0 collaboration
  • IIC Smart Factory Task Group collaboration

Presentations:

• prostep ivip SysML Workflow Forum (Timo Wekerle, prostep ivip) http://doc.omg.org/mantis/2018-03-01
• Model Interchange (MI) SIG status update (Ed Seidewitz, nMeta) http://doc.omg.org/mantis/2018-03-02
• End user requirements on SysML Model Interchange (William Beavin, Boeing) http://doc.omg.org/mantis/2018-03-03
• MBSE collaboration – report from GfSE Workshop & PLM4MBSE update (Uwe Kaufmann, ModelAlchemy) http://doc.omg.org/mantis/2018-03-04
• Production and Logistics Systems Modeling (Timothy Sprock, NIST) http://doc.omg.org/mantis/2018-03-05
• Siemens SDPD (Systems-Driven Product Development) vision (Mark Sampson, Siemens) http://doc.omg.org/mantis/2018-03-06

At the OMG technical meeting in Burlingame, CA, in the week of Dec. 04 2017, ManTIS DTF hosted a Manufacturing Information Day on Wednesday, Dec. 6 2017, and a plenarey meeting on Thursday, Dec 07 2017.

ManTIS plenary on Thursday Jun. 09 2017, 09:00 - 17:00

ManTIS plenary on Monday Mar. 20 2017, 09:00 - 17:00

ManTIS plenary on Monday Dec. 6 2016, 09:00 - 17:00

Presentations shown at the meeting:

Please find meeting minutes and presentations of past meetings here.

http://mantis.omg.org/legacy